JUMO di 32 Betriebsanleitung Seite 36

!
Please read these Operating Instructions before commissioning the instrument. Keep these
operating instructions in a place which is accessible to all users at all times. Please assist us
to improve these operating instructions. Your suggestions will be welcome.
Phone
Fax
!
All necessary settings are described in these operating instructions. If, however, any difficul-
ties should arise during commissioning, you are asked not to carry out any unauthorized
manipulations on the unit. You could endanger your rights under the instrument warranty!
Please contact the nearest subsidiary or the main factory in such a case.
E
When returning modules, assemblies or components, the regulations of EN 100 015 "Pro-
tection of electrostatically sensitive components" must be observed. Use only the appropri-
ate ESD packaging for transport.
Please note that we cannot accept any liability for damage caused by ESD (electrostatic dis-
charge).
in Germany (0661) 6003-725
abroad (+49) 661 6003-0
in Germany (0661) 6003-681
abroad (+49) 661 6003-607