JUMO di 32 Betriebsanleitung Seite 47

The parameters can be modified dynamically, by using the
on, the setting will either be accepted automatically after approx. 2 sec, or by pressing the
button.
Configuration level 1
The basic functions of the instrument are set here. In order to make the settings it is necessa-
ry to change to configuration level 1, via the parameter
accessed via another parameter, you can only view the parameter but not modify it.
The display alternately shows the configuration code (e.g.
OFFS ) and the code/parameter value. The parameters are modified dynamically, by using the
d
and buttons. After modification, the setting will either be accepted automatically after
approx. 2 sec, or by pressing the
Configuration level 2
At this level, you can set all the necessary parameters for the customized linearization correc-
tion. This level is only available if the parameter C118 is switched on.
The display alternates between showing the parameter symbol (e.g.
value. The parameters can be modified dynamically, by using the
fication, the setting will either be accepted automatically after approx. 2sec, or by pressing the
q
button.
Time-out
If no operation occurs, the indicator will automatically return to normal display after approx.
30sec.
q
button.
i d
and buttons. After modificati-
dF (parameter level). If the level is
C111 ) or the parameter symbol (e.g.
OFFS ) and the parameter
i d
and buttons. After modi-
q
i
11