Level Locking Via A Code - JUMO di 32 Betriebsanleitung

5.5

Level locking via a code

As an alternative to the logic input, level locking can be set
via a code (logic input has priority).
h Set the code with
normal display
Level locking via the logic input will inhibit the parameter and configuration levels (corresponds
to code 011).
Code Operating level
000 enabled
001 enabled
011 enabled
1
111 inhibited
1
The values at the operating level can only be displayed but not modified.
q d
+ (>5sec) in the
Parameter level
enabled
enabled
inhibited
inhibited
Configuration level
enabled
inhibited
inhibited
inhibited
18