Tietzsch MultiSafe DSP 3HS36 Bedienungsanleitung Seite 16

6. Change test electrodes
The MultiSafe DSP 3HS36 can be equipped with different test electrodes. Those can be easily screwed
onto the high-tension test probes. After this, perform the self-test!
Design of electrodes
The following test electrodes are available for the
MultiSafe DSP 3HS36:
HS36-i : semicircular electrode (standard)
HS36-G : peaked electrode with5 mm thread
HS36-Y : bifurcated electrode
7. Transportion
The MultiSafe DSP 3HS36 can be demounted for transportation.
Turn the test probe and the basic pipe counterclockwise.
After about 4 turns you can pull the test electrode from the basic pipe.
For safe transport fix the universal clip at the ball point.
Note:
The device may only be used when completely mounted and
after successfully performed self-test.
i G
16
Y