Defining Surfaces, Lubricants And Suspensions - struers TegraDoser-5 Gebrauchsanweisung

Defining Surfaces, Lubricants
and Suspensions
TegraDoser-5
Instruction Manual
Unlike the other parameter settings, before these parameters can be
selected, the type of consumables must be selected first. The same
method is used for all three consumable types:
As many different consumables are available, they are sub-divided:
1. Product groups, e.g. MD-Products
2. Product names, e.g. MD-Piano

With the EDIT METHOD STEP menu displayed.
Use the F1 and F2 buttons to move between the
F1/
parameters.
F2

When the correct parameter is highlighted.

Press ENTER
<CONSUMABLE> TYPE menu, e.g. SELECT SURFACE
TYPE.


Use the Arrow buttons

<consumable> Type.



Press ENTER
menu, e.g. SELECT SURFACE.

Note

to activate the SELECT
to select the correct


to activate the SELECT <consumable>
41