Using Struers Methods; Introduction; Viewing Struers Methods - struers TegraDoser-5 Gebrauchsanweisung

Introduction

Viewing Struers Methods

22
TegraDoser-5
Instruction Manual

3. Using Struers Methods

TegraDoser-5 software is delivered with a set of pre-loaded
preparation methods defined by Struers. These methods can be
used in their original form or copied and used as a foundation for
some user defined methods. The procedures for customising these
methods are provided in Chapter 4.
Under the Struers Methods menu, the 10 Metalog Guide Methods
are listed. To view these methods and the preparation steps they
contain:
If the MAIN MENU is not currently displayed, press Esc

until the MAIN MENU appears.
 Use the Arrow buttons
 STRUERS METHODS:


Press ENTER
menu.


This menu contains the list of 10 Metalog Guide Methods.
Use the Arrow buttons

 preparation method:


Press ENTER
<method name> menu.

This menu displays a list of up to 20 method steps
to select


to activate the STRUERS METHODS
to select the correct


to activate the VIEW METHOD -