Removing The Dosing Head From The Tegraforce - struers TegraDoser-5 Gebrauchsanweisung

Removing the Dosing Head from
the TegraForce
TegraDoser-5
Instruction Manual
Loosen the securing screw located on the top of the dosing

head.
Swing the dosing nozzle arm outwards away from the

TegraForce until it is clear of the D-sub connector.
Grip the top and bottom of the dosing head and pull upwards

until it comes free of the TegraForce D-sub connector.
Ensure that the tubes do not get snagged on the TegraForce as

you lift the dosing head clear.
7