Storage And Disposal; Technical Data - Husqvarna Automower EPOS Plug-in Kit Bedienungsanweisung

41.3 LED indicator lamp on the reference station
Light
Green flashing light
Green constant light
Red flashing light
White flashing light
41.4 LED indicator lamp on the charging station
For a fully functional installation, the indicator lamp in the charging station must show a solid or flashing green light. If
another color shows, follow the troubleshooting guide below.
There is more help on www.husqvarna.com. If you still need help, speak to your local Husqvarna representative.
Light
Green solid light
Green flashing light
Red flashing light
Red solid light
42.1 Storage
If you store the reference station indoors, keep the arm
installed at the post or wall to be able to install the
reference station on its original position again.
If you keep the reference station outdoors during the
winter, we recommend you to keep the power supply
connected.

43.1 Technical data

Reference station dimensions
Length, max length including plate for post installation cm/in.
Width, cm/in.
Height, cm/in.
Weight, reference station kg/lb
Weight, arm kg/lb

124 - Storage and disposal

Status
Startup of the reference station. This can take some minutes.
In operation.
The reference station is not working due to an error. Restart the product. If the prob-
lem stays, speak to your approved servicing dealer.
Firmware update is necessary. Speak to your local Husqvarna representative.
Status
Good signals.
ECO mode is activated.
The signals are good and
Interruption in the charging station's antenna. Speak to your local Husqvarna repre-
sentative.
Fault in the circuit board or incorrect power supply in the charging station. The fault
must be correct by an authorized service technician. Speak to your local Husqvarna
representative.
42 Storage and disposal
43 Technical data
42.2 Disposal
Obey the local recycling requirements and applicable
regulations.
36/13.8
19/7.5
36/13.8
0.88/1.9
0.33/0.73
1944 - 001 - 13.01.2023