Symbols In The App; Installation - Husqvarna Automower EPOS Plug-in Kit Bedienungsanweisung

Use a detachable power sup-
ply as specified on the rating
plate adjacent to the symbol.
The chassis contains components which
are sensitive to electrostatic discharge
(ESD). The chassis must only be opened
and sealed by an authorized service
technician. The warranty will not be
applicable if the seal is broken.
Note:
Other symbols/decals on the product refer to
certification requirements for some markets.

38.1.7 Symbols in the app

Shows the strength of the radio signal that
the product receives from the reference
station.
39.1 Introduction - Installation
WARNING:
safety chapter before you install the product.
WARNING:
safety chapter in the manual for the robotic
lawn mower before you install the product.
CAUTION:
Use original spare parts and
installation material.
Note:
Refer to www.husqvarna.com for more
information about installation.
39.2 Primary components for

installation

The installation includes the components that follow:
33
• Robotic lawn mower , that cuts the lawn
automatically.
34
• Charging station , that charges the product.
33
Purchased separately.
34
Purchased separately.
35
Included with the charging station.
106 - Installation
39 Installation
Read and understand the
Read and understand the
EPOS confirmed . The
The status is
product has an accurate position and
direction. This is necessary to operate
the product automatically and for the
installation of map objects.
EPOS action is necessary .
The status is
The product has an accurate position but
it is necessary to operate the product,
manually or automatically, to get an
accurate direction.
EPOS searching . The
The status is
product does not have an accurate
position and is searching for the satellite
signals and the correction data to get an
accurate position.
• Power supply unit 35 , which is connected to the
charging station and a 100-240V power outlet.
• Power supply unit, which is connected to the
reference station and a 100-240V power outlet.
• Reference station, that receives satellite signals
and sends correction data to the robotic lawn
mower.
® ™
• Automower EPOS Plug-in.
• Mobile device with the Automower
to do the installation and the settings for the
product.
39.3 To prepare for installation
CAUTION:
Holes with water in the lawn
can cause damage to the product.
CAUTION:
Read the installation
chapter before you start the installation.
• Make a blueprint of the work area and include all
obstacles. This makes it easier to examine where
to put the charging station, the reference station,
and the virtual boundaries.
® Connect app
1944 - 001 - 13.01.2023