SFA Saniswift Pro Bedienungs- Und Installationsanleitung Seite 8

1. SAFETY
1.1 IDENTIFICATION OF WARNINGS
Meaning
This term defines a high risk of
DANGER
danger, which can lead to death
or serious injury, if not avoided.
This term defines a medium risk of
WARNING
danger, which can lead to serious
or minor injury, if not avoided.
This term defines a low risk of
CAUTION
danger which can lead to minor
injuries if not avoided.
This term characterises dangers
NOTICE
to the machine and its proper
operation.
Warning of a general danger.
The danger is specified by
indications given in the table.
This symbol characterises dangers
associated with the voltage and
provides information on voltage
protection.
1.2 GENERAL POINTS
This operating and installation manual contains
important instructions to follow for the fitting,
operation and maintenance of the Saniswift Pro
pumping station. Following these instructions
guarantees safe operation and prevents injury and
property damage.
Before fitting and commissioning the pumping
station, the qualified installer/user concerned
must read and understand all these instructions.
Please follow the safety instructions in every sec-
tion.
1.3 INTENDED USE
Only use the pumping station in the fields of
application described in this documentation.
The pumping station must only be operated in
technically perfect conditions.
The pumping station must only pump the fluids
described in this documentation.
The pumping station must never operate without
pumped fluid.
Never exceed the usage limits defined in the
documentation.
The safe operation of the lifting station is only
ensured if it is used as described in this manual.
1.4 QUALIFICATION AND TRAINING OF STAFF
Commissioning and maintenance of this device
must be performed by a qualified professional.
Please refer to installation standard EN 12056-4.
1.5 SAFETY INSTRUCTIONS FOR MAINTENANCE,
INSPECTION AND INSTALLATION
Any alteration or modification of the pumping
station will void the warranty.
Only use original parts or parts recognised by the
manufacturer. The use of other parts may void the
manufacturer's liability for any resulting damage.
The operator must ensure that all maintenance,
inspection and installation work is carried out
by a person who has previously studied these
operating and installation instructions.
Before working on the pumping station, switch it
off and unplug the pumping station's power plug.
You must follow the procedure for shutting down
the pumping station described in this operating
manual.
Pumping stations
media have to be decontaminated. Prior to
initial (re-)start-up, you are to take heed of the
points listed in the section Commissioning (see
5. Commissioning)
Keep unauthorised persons (e.g. children) away
from the lifting station.
Observe all safety instructions in this operating
and installation manual.
This operating manual must always be available
on site so it can be accessed by qualified staff and
the operator.
1.6 RISKS AND CONSEQUENCES OF NON-
COMPLIANCE WITH THE OPERATING MANUAL
Failure to comply with this operating and installa-
tion manual will result in the loss of warranty rights
and rights to damages.
2. TRANSPORT, TEMPORARY STORAGE,
RETURNS, DISPOSAL
2.1 RECEIVING INSPECTION
When receiving goods, check the condition of the pumping station's
packaging.In case of damage, note the exact damage and immedia-
tely notify the dealer in writing.
2.2 TRANSPORT
DANGER
Dropping the pumping station.
Risk of injury if the pumping station is dropped!
 Observe the indicated weight.
 Never suspend the pumping station by the power
cord.
 Use suitable means of transport.
Keep the pumping station horizontal when moving it.
Choose suitable means of transport according to the weight table :
Gross weight
Saniswift Pro
The pumping station has been inspected to make sure there is no
damage due to transport.
2.3 TEMPORARY STORAGE
• The station can be conserved in a cool, dark, dry and frost-free site.
• The station must be kept in horizontal position.
In the case of commissioning after an extended storage period, take
the following precautions to ensure storage of the pumping station:
NOTICE
Wet, dirty or damaged openings and junction
points.
Leaks or damage to the pumping station!
 Clear the pumping station's blocked openings at
the time of installation.
8
EN
that convey hazardous
8,1 kg