Display-Mode - Litecraft WashX.432 sw Bedienungsanleitung

DISPLAY-MODE

display function
DEF. SET DEF. SET
<***>
*** =
<NO>
<YES>
DMX Addr DMX Addr
<***>
*** = DMX-adress
DMX Chan DMX Chan
**** =
**** =
<2ch mac>
<2ch sw>
Master/Slave Master/Slave
<******>
****** = Master
****** = Slave
SET SET <***>
DIMMER Dimmer
*** = <0-100>
SET SET <***>
SW MACRO SW Mac
*** = <16-100>
reset all parameter to factory defaults
display the DMX-adress
(2 ch = <001-511>)
(default setting = 1)
setting DMX-channel mode
(description of modes in next chart)
(default setting = 2 ch sw)
setting working mode
(Master = control without external controller)
(Slave = control with external controller)
(default setting = Slave)
setting brightness in steps of 100 – store by
press and hold jogwheel for at least one second
– display quits "OK!"
(default setting = 100)
69 pre-programmed smartwhite macros
available - store by press and hold jogwheel for
at least one second – display confirms "OK!"
(default setting = 100)