Display-Mode - Litecraft PowerBarX.15 Bedienungsanleitung

DISPLAY-MODE

display function
LITECRAFT LITECRAFT
V *.* V *.**
*.** = Software-Version
<**° C> <**° C>
<Slave Mode> <*** = Betriebstemperatur
<No Signal> <Slave Mode>
<No Signal>
<**° C> <**° C>
<Master Mode> <*** = Betriebstemperatur
<No Signal> <Master Mode>
<******>
<******> = Auto Programm 1-14
DMX Address DMX Address
<***> <***>
*** = DMX-adress
DMX Channel Channel
<****> **** =
< 4 Ch>
< 6 Ch>
<10 Ch>
<60 Ch>
<65 Ch>
Static Fixture Color
<R>
<G>
<B>
<W>
<GB>
<RB>
<RG>
<RGB>
<RW>
<GW>
<BW>
<RGW>
<RBW>
<GBW>
<RGBW>
Manual Color
<Red>
<***>
*** = 0-255
shows the software version direct after
switching on the unit
(this messages appears after 3
seconds automaticly)
unit is in slave mode and is not receiving
dmx-values by dmx-input (this menu is
only for information - no settings
available)
unit is in master mode and is playing
back one of fourteen auto programms
(this menu is only for information - no
settings available)
display the DMX-adress
( 4 Ch = <001-509>)
( 6 Ch = <001-507>)
(10 Ch = <001-503>)
(60 Ch = <001-453>)
(65 Ch = <001-448>)
(default setting = 1)
setting DMX-channel mode
(description of modes in next chart)
(default setting = 10 Ch)
setting color/color combination @ full
brightness for selected color
setting brightness for each color in steps
of 256
(Standard Einstellung =
R = 255, G = 255, B = 255, W = 255)