Display-Mode - Litecraft BeamX.7 Bedienungsanleitung

DISPLAY-MODE

display function
DEF. SET DEF. SET
<***>
*** =
<NO>
<YES>
DMX Addr DMX Addr
<***>
*** = DMX-adress
DMX Chan DMXChan
**** =
**** =
< 2Ch>
< 3Ch>
< 4Ch>
< 5Ch>
<10Ch>
Dimmer Dimmer
<***>
*** =
<OFF>
<1>
<2>
<3>
<4>
Master/Slave Master/Slave
<******>
****** = Master
****** = Slave
ColSet ColSet
<Red>
<***>
*** = <0-255>
<Green>
<***>
*** = <0-255>
<Blue>
<***>
*** = <0-255>
<White>
<***>
*** = <0-255>
reset all parameter to factory defaults
display the DMX-adress
(2 Ch = <001-511>)
(3 Ch = <001-510>)
(4 Ch = <001-509>)
(5 Ch = <001-508>)
(10 Ch = <001-503>)
(default setting = 1)
setting DMX-channel mode
(description of modes in next chart)
(default setting = 4 Ch)
setting dimmer curve
OFF = dimmer linear
1 = dimmer delayed 1
2 = dimmer delayed 2
3 = dimmer delayed 3
4 = dimmer delayed 4
setting working mode
(Master = control without external
controller)
(Slave = control with external controller)
(default setting = Slave)
setting brightness for each color in
steps of 256