Display-Mode - Litecraft OutLED AT60.zoom Bedienungsanleitung

Display-Mode

display
LITECRAFT
V *.*
<**°C>
<Slave Mode>
<No Signal>
<**°C>
<Master Mode>
<No Signal>
DMX Address
<***>
DMX Channel
<****>
22
function
LITECRAFT
V *.**
*.** = Software-Version
<**°C>
<*** = Fixture-Temperature
<Slave Mode>
<No Signal>
<**°C>
<*** = Fixture-Temperature
<Master Mode>
<******>
<******> = Auto Programm 1-5
DMX Address
<***>
*** = DMX-Adresse
Channel
**** =
< 5 Ch>
< 7 Ch>
<10 Ch>
<11 Ch>
<13 Ch>
<17 Ch>
shows the software version direct after switching on
the unit
(this messages appears after 3 seconds automaticly)
unit is in slave mode and is not receiving dmx-values
by dmx-input
(this menu is only for information - no settings availa-
ble)
unit is in master mode and is playing back one of five
Auto programms
(this menu is only for information - no settings availa-
ble)
display the DMX-adress
( 5 Ch = <001-508>)
( 7 Ch = <001-506>)
(10 Ch = <001-503>)
(11 Ch = <001-502>)
(13 Ch = <001-500>)
(17 Ch = <001-496>)
(default setting = 1)
setting DMX-channel mode
(description of modes in next chart)
(default setting = 11 Ch)