Display-Mode - Litecraft OutLED WT20.swa Bedienungsanleitung

DISPLAY-MODE

display function
LITECRAFT LITECRAFT
SW.V *.* SW.V *.*
DEF. SET DEF. SET
<***>
*** =
<NO>
<YES>
DispPerm DispPerm
<***>
*** =
<On>
>Off>
DMX-1CH DMX-1CH
DMX *** =
< DMX-adress
DMX-2CH DMX-2CH
DMX *** =
< DMX-adress
DMX-3CH DMX-3CH
DMX *** =
< DMX-adress
DMX-6CH DMX-6CH
DMX *** =
< DMX-adress
ColMacro ColMacro
<Macro **>
** = <preprogrammed white tones>
ColProgr ColProgr
<Prog **>
** = <1-6>
ColSpeed
<**>
** =
<1-16>
ColSet ColSet
<CW>
<***>
*** = <0-255>
<WW>
Shows the software-version direct after
switching on the unit
*.* = software-version
(this menu disaperars automatically
after 3 seconds)
reset all parameter to factory defaults
(this menu disaperars automatically
after 5 s)
(default setting = DMX-3CH, Adresse
001)
setting automatic switch off for lcd
backlite (display switches off
automaticly after 10 s and will be
activated by pressing one off the
buttons for at least 3 s)
(default setting = On)
setting DMX-channel mode 1
(description of modes in next chart)
setting DMX-channel mode 2
(description of modes in next chart)
setting DMX-channel mode 3
(description of modes in next chart)
setting DMX-channel mode 6
(description of modes in next chart)
choose one of 76 pre-programmed
white macros + black
choose of 6 pre-programmed chasers
choose speed in 16 steps for pre-
programmed chasers
setting brightness for each white tone in
steps of 256