Display­mode - Litecraft inled wt20.swa Bedienungsanleitung

Display­Mode
display
LITECRAFT
SW.V *.*
DEF. SET
YES
DEF. SET
NO
FixHours
***** h
SAFETY
HOT OFF
SAFETY
HOT LOW
DispPerm
ON
DispPerm
OFF
18
function
shows the software version direct after switching on the unit
*.* = software­version
alle settings will be set to factory defaults (DMX­3CH, address 001)
all settings (DMX mode/macro etc. ) will not be changed – this menue disappears auto­
maticly after 5 seconds
*****= fixture working hours
LEDs will switch off due to too high internal temperature
LEDs will reduce driving about 25%
display permanent on
display switches off after 10 s and switches on by pressing any button for at least 3 s