Display-Mode - Litecraft washx.21 Bedienungsanleitung

DISPLAY-MODE

display function
LITECRAFT LITECRAFT
V *.* V *.**
*.** = Software-Version
<**° C> <**° C>
<Slave Mode> <*** = Betriebstemperatur
<No Signal> <Slave Mode>
<No Signal>
<**° C> <**° C>
<Master Mode> <*** = Betriebstemperatur
<No Signal> <Master Mode>
<******>
<******> = Auto Programm 1-5
DMX Address DMX Address
<***> <***>
*** = DMX-adress
DMX Channel Channel
<****> <****>
**** =
< 4 Ch>
< 6 Ch>
<11 Ch>
Static Fixture Color
<R>
<G>
<B>
<W>
<GB>
<RB>
<RG>
<RGB>
<RW>
<GW>
<BW>
<RGW>
<RBW>
<GBW>
<RGBW>
White Presets
<3.000 K>
<4.000 K>
<4.200 K>
<5.000 K>
<5.600 K>
<6.000 K>
shows the software version direct after
switching on the unit
(this messages appears after 3
seconds automaticly)
unit is in slave mode and is not receiving
dmx-values by dmx-input (this menu is
only for information - no settings
available)
unit is in master mode and is playing
back one of five Auto programms
(this menu is only for information - no
settings available)
display the DMX-adress
( 4 Ch = <001-509>)
( 6 Ch = <001-507>)
(11 Ch = <001-502>)
(default setting = 1)
setting DMX-channel mode
(description of modes in next chart)
(default setting = 11 Ch)
setting color/color combination @ full
brightness for selected color
setting white presets @ different color
temperatures
(default setting = 3.000 K)