Troubleshooting; Possible Cause; Maintenance Schedule - Scheppach 5906225901 Originalbetriebsanleitung

14. Troubleshooting

Fault
Engine does not start
Generator has too
little or no voltage

15. Maintenance schedule

Please adhere to the following maintenance periods in order to ensure a failure-free operation.
IMPORTANT! The equipment must be filled with engine oil and fuel before it is started.
Checking the engine oil
Changing the engine oil
Checking the air filter
Cleaning the air filter
Cleaning the petrol filter
Visual inspection of the
equipment
Cleaning the spark plug
Checking andreadjusting
the throttle vale on the
carburetor
Cleaning the cylinder
head
Set the valve play
Important: The positions marked with "x*" should only be carried out by an authorized dealer.
26 | GB

Possible cause

Automatic oil cut-out has not
responded
Spark plug fouled
No fuel
Electronic defective
Over-current circuit-breaker
has triggered
Air filter dirty
Before After an operating
each period of 20 hours
use
X
For the first time,
then every 50
hours
X
X
www.scheppach.com
Remedy
Check oil level, top up engine oil
Clean or replace spark plug
Refuel / have the petrol cock checked
Contact your dealer
Actuate the circuit-breaker and reduce the
consumers
Clean or replace the filter
After an operating After an oper-
period of 50 hours ating period of
100 hours
X
X
Distance: 0.6
mm, replace if
necessary
After an oper-
ating period of
300 hours
Change the
filter insert if
necessary
X
X*
X*
X*