Calibration With Mv/V - HBM WE2110 Bedienungsanleitung

WE2110
7

Calibration with mV/V

Scale type "DIRECT" within the BUILD menu has to be selected!
5 sec.
(Verification counter)
ZERO
SELECT GROUP
2x
SELECT GROUP
Zero calibration
TARE
SELECT ITEM
GROSS/NET
SELECT CHANGE
PRINT
CHANGE
TARE
SELECT ITEM
(When directly adjusting mV/V, enter zero point and sensitivity in mV/V)
A2181-1.0 de/en
CHANGE ALL ITEMS
WE2110
NET/GROSS
ZERO TARE
SELECT GROUP SELECT ITEM SELECT CHANGE
PRESS TO START
ZERO
7x
TARE
SELECT ITEM
Current weight
(flashing)
Take over or input
zero in mV/V
(Current reading
is prompted)
GROSS/NET
− Select change
for next digit
SELECT CHANGE
PRINT
− CHANGE for
change
CHANGE
Current weight
(flashing)
SELECT GROUP
PRINT SETUP
È È È È
CHANGE
È È È È
TARE
SELECT ITEM
Span calibration
GROSS/NET
SELECT CHANGE
PRINT
CHANGE
SELECT CHANGE
TARE
SELECT ITEM
ZERO
Finish
5 sec.
Current weight
(flashing)
Input Span in mV/V
(e.g. 1.0000 mV/V)
GROSS/NET
− SELECT CHANGE
for next digit
PRINT
− CHANGE for change
CHANGE
Current weight
(flashing)
61
HBM