7 Changing the WLAN channel
Changing channels in the infrastructure mode
Opening the Internet Explorer
Opening the Internet Explorer
Log in at the access point
24
Installation instructions for WLAN card LINKSYS WMP54GS CEREC 3 Acquisition Unit
7
Changing the WLAN channel
7.1
Changing channels in the infrastructure
mode
Changing channels is performed centrally at the access point in the
Infrastructure mode. The acquisition unit and the milling unit then
automatically obtain the current channel from the access point.
Click "Start" / "Programs" / "Internet Explorer".
The Internet Explorer window opens.
1.
Enter the following IP address in the Internet Explorer address line:
192.168.230.240.
The login window of the access point opens.
Fig. 7-1 Access point login window
Sirona Dental Systems GmbH
61 90 602 D 3344
D 3344.092.16.01.02 09.2007