Setting Measurement Locations - VOLTCRAFT WBP-120 Bedienungsanleitung

12.6 Setting measurement locations

With the measurement menu you can set where and how temperature is measured.
1. Touch the measurement menu button
2. Select a mode to activate it.
Mode
Centre point:
Measure the centre point temperature.
Hi/Lo Spot analysis:
Capture the maximum/minimum temperature.
Line analysis:
Measure the line temperature, with one horizontal line and one vertical
line.
Area analysis:
Manually set measuring areas. Maximum, minimum, and average tem-
peratures are displayed for each area.
Touch button repeatedly to set areas (max. 3 areas).
Touch and drag corners to adjust.
Touch and drag areas to reposition.
to open the menu.
69