Quick Start For The Impatient User - VOLTCRAFT WBP-120 Bedienungsanleitung

9 Quick start for the impatient user

1. Press the power button
turn the thermal imager on.
2. Set the temperature range. Select
Range.
3. Set the emissivity of the object you want to measure. Touch the parameter
button , select 'Emissivity', and select the required value.
4. Point the camera at the object.
5. Press the shutter button to record an image.
6. Connect the thermal imager to your computer with the USB cable and transfer
the image for permanent storage.
56
for approx. 2 seconds and then release the button to
> Measure Setting > Temp.