Resetting; Cleaning And Care - VOLTCRAFT WBP-120 Bedienungsanleitung

18 Resetting

Reset the thermal imager to the factory settings if it no longer functions as expected.
1. Select > Reset > Default settings.
2. To cancel resetting, touch No. To reset, touch Yes.

19 Cleaning and care

Important:
– Do not use aggressive cleaning agents, rubbing alcohol or other chemical
solutions. They damage the housing and can cause the product to malfunc-
tion.
– Do not immerse the product in water.
1. Disconnect the product from the power supply.
2. Clean the product with a dry, fibre-free cloth.
CAUTION! Too much pressure can damage the lens. Clean gently.
3. Wipe clean the lens with a lens cleaning towel.
78