Transferring Images And Videos To A Computer; Using As A Computer Camera - VOLTCRAFT WBP-120 Bedienungsanleitung

13.5 Transferring images and videos to a computer

You can connect the thermal imager to your computer to transfer images and video
from the thermal imager to the computer.
Important:
If you have installed a MicroSD card, you cannot read the internal memory.
To read the internal memory, remove the MicroSD card before connecting to
the computer.
1. Connect the supplied USB cable to the imager and your computer.
2. Confirm the pop-up USB CONNECTED with OK.
The thermal imager storage shows as an external drive on your computer.
Æ
3. Transfer image data.
4. Eject the drive from your computer.
5. Disconnect the USB cable.

14 Using as a computer camera

You can use the thermal imager as a UVC camera (USB video class camera). The
computer must support UVC (USB video class).
1. Connect the provided USB cable to the thermal imager and the computer.
2. Select > Device Setting > USB Mode > PC Camera.
3. Use the thermal imager camera with compatible camera software.
73