10.3 Powering off
Option 1:
1. Press and hold the power button
2. In the pop-up, touch OK to confirm switching off.
Option 2:
To directly power off, press and hold the power button
10.4 Adjusting screen brightness
1. Select
> Device Setting > Brightness.
2. Use the slider to adjust the screen brightness.
10.5 Setting temperature units
1. Select
> Measure Setting > Temp. Unit.
2. Select a temperature unit.
3. Touch < to save the selection.
10.6 Setting time and date
The thermal imager adds timestamps to recorded images and video. Set the time
and date for accurate timestamps.
1. Select
> Device Setting > Time/Date.
2. Set the time and date.
3. Touch Set Date to save the time and date settings -OR- touch Cancel to
exit without saving.
10.7 Setting up data storage
Images and videos will be stored on a MicroSD card. Before you can record images
and videos, insert a MicroSD card and fomat it.
1. Insert a MicroSD card into the MicroSD card slot.
2. Select
> Reset > Format Memory to open the formatting menu.
3. Select Yes to format.
The memory card is formatted and ready for use.
Æ
58
for approx. 2 seconds.
for approx. 6 seconds.