Product Description; Inserting And Charging The Battery - VOLTCRAFT 1897504 Bedienungsanleitung

8. Product description

The thermal imaging camera has a graphic TFT colour display. This display can be used for all necessary displays
and to implement all settings.
The main menu, which can be called up via a multi-function button, allows you to set the operating parameters. The
arrow buttons allow easy navigation in the menu.
The camera provides a visual representation of heat distribution in objects and on surfaces. Temperature distribution
is displayed with false colour photography. Three different colour palettes can be set to ensure the best possible
contrast display.
The temperature in the centre of the image (spot area) as well as the maximum and minimum temperature values
are indicated by a marker. The thermal imaging function can be used for many areas of application with the extensive
setting options.
Thermal images can be stored on a microSD memory card.

9. Inserting and charging the battery

The lithium-ion battery is delivered pre-charged and must be fully charged before initial use.
Only use the charging cable included to charge the rechargeable Li-ion battery. A different charging cable might be
undersized. This creates a fire hazard.
The camera becomes hot during charging. Place the camera on a flat, robust and heat-resistant surface.
Inserting the rechargeable battery into the camera and removing the rechargeable battery
• Place the measuring instrument sideways on a soft surface.
• Use a suitable Phillips-head screwdriver to unscrew the two screws on the battery compartment (11).
• Pull the battery compartment out of the camera handle.
• Insert the rechargeable battery into the measuring instrument with the plus (+) contact first. The polarity is indicated
on the battery compartment cover.
• Close the battery compartment in reverse order and screw it back in carefully.
Charging the battery pack
The battery must be charged upon initial operation or when the battery status indicator lights up red.
1 Open the rubber cover (6) on the top of the device.
2 Insert the micro USB plug on the charging cable into the micro USB charging socket on the camera.
3 Insert the USB plug on the charging cable into a USB charging socket on a computer or on a suitable USB charger.
4 The charging indicator will appear on the display to indicate the charging process.
5 When the battery symbol turns green, the charging process is completed.
6 Disconnect the charging cable and close the rubber cover carefully.
7 The measuring instrument is ready for operation.
30