Sirona CEREC AC Installationsanleitung Seite 29

Sirona Dental Systems GmbH
Installation Instructions for Pairing the Radio Modules HW8614/F2 and HW8612/F2 CEREC AC 5.2 Pairing another radio module of the
62 80 064 D 3492
D 3492.031.02.02.02 06.2012
5 Pairing radio modules of the CEREC 3 milling units with those of the CEREC AC acquisition unit
10. Close the window to exit the program.
11. Open the CEREC 3D program and in the
"Configuration"
12. Click on the
 The CEREC 3 milling unit is now included in the list of devices.
5.2
Pairing another radio module of the CEREC 3
milling unit
1. In the program menu, select "com0com" > "Setup".
Pairing another radio module of the CEREC 3 milling unit
 The overview of the available virtual COM interfaces (COM ports)
appears.
2. Click on the "Add Pair" button to set up a new virtual COM interface
pair (e.g. "Virtual Port Pair 1".
3. Enter the new interface names e.g., COM7 and COM8.
> "Devices..." .
"Add automatically"
button.
"Settings"
menu, choose
11