Sirona CEREC AC Installationsanleitung Seite 28

5 Pairing radio modules of the CEREC 3 milling units with those of the CEREC AC acquisition unit
5.1 Pairing the first radio module of the CEREC 3 milling unit
10
Installation Instructions for Pairing the Radio Modules HW8614/F2 and
6. Click the "COM Port" tab.
7. Select the checkbox next to one of the free COM interfaces displayed
(preferably COM5) and click "OK" to confirm.
 At the end of the configuration process, the overview window is
displayed. The radio module, together with its addresses and the
previously selected COM interface should now be listed in the
status window.
8. Click "OK" to close this window.
9. Click the "Stop subscription mode" button in the
"Subscription Control" window to complete the pairing
process.
Sirona Dental Systems GmbH
62 80 064 D 3492
D 3492.031.02.02.02 06.2012