Sirona CEREC AC Installationsanleitung Seite 27

Sirona Dental Systems GmbH
Installation Instructions for Pairing the Radio Modules HW8614/F2 and HW8612/F2 CEREC AC 5.1 Pairing the first radio module of the
62 80 064 D 3492
D 3492.031.02.02.02 06.2012
5 Pairing radio modules of the CEREC 3 milling units with those of the CEREC AC acquisition unit
3. When "Subscription mode started" or "OK" is displayed as the
last message, press and hold the black C button on the radio module
of the CEREC 3 milling unit for at least 6 seconds.
4. When the red LED B starts to flash, release the button.
 The pairing process is now underway.
 When the pairing has been performed successfully, the "SWAP
Service Configuration" window opens automatically. In
this window, you need to assign a virtual COM address to the
newly paired serial radio module.
5. On the "Type" tab, check that the checkbox next to "COM Port" is
selected.
9