GGMgastro GSH360 Bedienungs- Und Wartungsanleitung Seite 16

2.1 GSH360 OPERATION
2.1.a Switch-on and Preparing the machine (Fig. 1)
To turn the machine on, keep the
EN
START (ON/OFF) key pressed for
about 5 sec.
The START key turns YELLOW.
F2 appears on the display.
IMPORTANT
The last cycle used
when the machine is switched on.
WASH RINSE
When the water level is reached in
the tank, the START key FLASHES
GREEN.
The set-point temperatures appear on the display.
The machine is already available for washing in this
condition.
If the wash cycle is started with the FLASHING GREEN
key, the START key will turn RED and H3 will appear
on the right side of the display.
When the set tank temperature is reached,
the START key lights up STEADY GREEN.
TEMPERATURE READINGS
The set-point temperatures of the water in the tank
and boiler appear on the display.
With the machine in stand-by, the
ACTUAL temperature in the boiler
and in the tank for the selected
cycle can be displayed by press-
ing the BACK key.
If no key is pressed, after about 5 sec., the set-point
temperatures appear on the display again.
16
remains set and is displayed
1 2 3
WASH RINSE
WASH RINSE
WASH RINSE
WASH OPERATIONS
Add the amount of industrial detergent into the tank,
as recommended by the manufacturer, indicated on
the product tank as a concentration in g/l.
Add an amount (in g/l) according to an average water
consumption of 3l with every wash.
The volume of water in the tank, which is necessary
for the amount of detergent to be calculated for models
GSH360, is indicated on the page related to the
technical data of the dishwasher.
The rinse agent dosage is managed both during the
fill-up phase and during the restoring phase by means
of a hydraulic pump. The hydraulic pump is calibrated
by a qualified technician during installation.
With each wash, the pump restores the values of the
rinse agent indicated by the manufacturer.
We recommend installing a peristaltic pump to dose
the detergent.
ATTENTION
When the items to be washed have burnt
deposits or much time has passed before
being washed, they must be soaked in wa-
ter with an appropriate emollient product.
Do not use manual washing products as
they could generate foam inside the ma-
chine.
Introduce the dish rack into the machine after having
removed solid waste from the objects
to be washed.
2.1.b CYCLE SELECTION
The duration of the wash cycle can be chosen from dif-
ferent cycle times, indicated by the respective symbol:
ECO GLASSES
selected by pressing the SCROLL
key.
Every time the key is pressed, the cycle to be performed
is displayed and the relevant BLUE LED lights up.
ATTENTION
When running a washing cycle with the bottle rack,
make sure to insert it correctly as in the following
images.
EXTRA CYCLES
C1 (SELF-WASHING) - C2 (DRAIN) optional
DISHES BOTTLES