e
2 Function
3 Dimensions
Dimensions in
mm (inch)
10
❑ Due to its construction, the transmitter cannot be repaired. When dispo-
sing of the head transmitter, please take note of the local disposal regula-
tions.
❑ The unit must only be powered by a power supply that operates using an
IEC 61010-1 compliant energy limit circuit: "SELV or Class 2 circuit"
Electronic monitoring and transformation of various input signals into an ana-
logue output signal in industrial temperature measurement. Setting up of the
transmitter is done using the HART
module (DXR275/375) or PC (Commuwin II, FieldCare or ReadWin
®
protocol using the hand operating
®
2000).