Accessories - Endress+Hauser iTEMP HART DIN rail TMT122 Bedienungsanleitung

Presettable parameters
Expanded settings
Service functions

7 Accessories

• Cold junction compensation (internal/external on TC connection)
• Temperature external (on TC with cold junction compensation external)
• Compensation resistance (0 to 30 Ω) on 2-wire connection
• Fault condition reaction (
• Output (analogue standard/inverse)
• Damping (0 to 100 s)
• Offset (-9.9 to +9.9 K)
• TAG (Measurement point description)
• Identifier (Descriptor)
• Simulation (on/off)
• Reset/factory default
• Serial number (only display)
• Operation code (=release code 281)
®
For detailed ReadWin 2000 operating instructions please read the online
documentation contained in the ReadWin
❑ Commubox FXA191, Order Code: FXA191-G1
❑ PC operating software: COMMUWIN II, FieldCare or ReadWin
Please contact your supplier when ordering.
®
ReadWin 2000 can be downloaded free of charge from the Internet from the
following address: www.endress.com/ReadWin
❑ Hand operating module 'HART
Order Code: DXR375-...
≤ ≥
3.6 mA or 21.0 mA, > 21.5 mA is guaranteed)
®
2000 software.
®
Communicator DXR 375':
®
2000.
15