Function; Dimensions - Endress+Hauser iTEMP HART TMT 182 Bedienungsanleitung

e

2 Function

3 Dimensions

Dimensions in mm
10
Due to its construction, the transmitter cannot be repaired. When
disposing of the head transmitter, please take note of the local disposal
regulations.
The unit must only be powered by a power supply that operates using
an IEC61010-1 compliant energy limited circuit.
Electronic monitoring and transformation of various input signals into an
analogue output signal in industrial temperature measurement. Setting up
of the transmitter is done using the HART
operating module (DXR 275/375) or PC (Commuwin II, FieldCare or
®
ReadWin 2000).
®
protocol using the hand
∅5