Function; Dimensions - Endress+Hauser iTEMP HART DIN rail TMT112 Bedienungsanleitung

en

2 Function

3 Dimensions

12
❑ Due to its construction, the transmitter cannot be repaired. When dispo-
sing of the DIN rail transmitter, please take note of the local disposal regu-
lations.
❑ The unit must only be powered by a power supply that operates using an
IEC 61010-1 compliant energy limit circuit: "SELV or Class 2 circuit"
Electronic monitoring and transformation of various input signals into an ana-
logue output signal in industrial temperature measurement. Setting up of the
transmitter is done using the HART
Field Xpert SFX100 and the hand operating module (DXR375) or PC (Field-
®
Care or ReadWin 2000).
Dimensions in mm (inches)
®
protocol using the device configurator