Function; Dimensions - Endress+Hauser iTEMP HART DIN rail TMT 122 Bedienungsanleitung

e

2 Function

3 Dimensions

Dimensions in
mm (inch)
10
Due to its construction, the transmitter cannot be repaired. When dispo-
sing of the head transmitter, please take note of the local disposal regula-
tions.
The unit must only be powered by a power supply that operates using an
IEC 61010-1 compliant energy limit circuit.
Electronic monitoring and transformation of various input signals into an ana-
logue output signal in industrial temperature measurement. Setting up of the
transmitter is done using the HART
module (DXR 275/375) or PC (Commuwin II, FieldCare or
®
ReadWin 2000).
®
protocol using the hand operating