2 Function
3 Dimension
Endress+Hauser
Due to its construction, the transmitter cannot be repaired. When dispos-
ing of the transmitter, please take note of the local disposal regula-
tions.
The unit must only be powered by a power supply that operates using an
IEC 61010-1 compliant energy limited circuit: "SELV or Class 2 circuit"
Electronic monitoring and transformation of various input signals into an ana-
log output signal in industrial temperature measurement. Settin up of the
transmitter is done using one of the configuration sets. These are available as
accessories (see page 13).
ƒig. 1:
Dimensions in mm (inches)
TMT111
en
9