Function; Dimensions - Endress+Hauser iTEMP TMT111 Bedienungsanleitung

2 Function

3 Dimension
Endress+Hauser
■ Due to its construction, the transmitter cannot be repaired. When dis-
posing of the transmitter, please take note of the local disposal regu-
lations.
■ The unit must only be powered by a power supply that operates using
an IEC 61010-1 compliant energy limited circuit: "SELV or Class 2 cir-
cuit"
Electronic monitoring and transformation of various input signals into an
analog output signal in industrial temperature measurement. Settin up
of the transmitter is done using one of the configuration sets. These are
available as accessories. →  13
12.6 (0.5)
 1: Dimensions in mm (in)
112.5 (4.43)
TMT111
en
9