Return And Disposal - WIKA CPB3800 Betriebsanleitung

8. Faults / 9. Return and disposal
CAUTION!
If faults cannot be eliminated by means of the measures listed above,
the pressure balance must be shut down immediately, and it must be
ensured that pressure is no longer present, and it must be prevented
from being inadvertently put back into service.
In this case, contact the manufacturer.
If a return is needed, please follow the instructions given in chapter
9.1 "Return".

9. Return and disposal

WARNING!
Residual media at the pressure balance can result in a risk to persons,
the environment and equipment. Take sufficient precautionary measures.
9.1 Return
WARNING!
Strictly observe the following when shipping the instrument:
All instruments delivered to DH-Budenberg/WIKA must be free from any
kind of hazardous substances (acids, bases, solutions etc.).
When returning the instrument, use the original packaging or a suitable transport
package.
To avoid damage:
1. Place the piston-cylinder unit into the designed transport box (see chapter
6.4 „Assembly of piston unit").
2. Wrap the instrument in an antistatic plastic film.
3. Place the instrument, along with the shock-absorbent material, in the packaging.
Place shock-absorbent material evenly on all sides of the transport packaging.
4. If possible, place a bag, containing a desiccant, inside the packaging.
5. Label the shipment as transport of a highly sensitive measuring instrument.
Information on returns can be found under the heading "Service" on our
local website.
WIKA operating instructions model CPB3800
GB
43