1. General information
1. General information
The model CPB3800 pressure balance in compact design described in the operating
■
GB
instructions has been designed and manufactured using state-of-the-art technology.
All components are subject to stringent quality and environmental criteria during
production. Our management systems are certified to ISO 9001 and ISO 14001.
These operating instructions contain important information on handling the
■
instrument. Working safely requires that all safety instructions and work instructions
are observed.
Observe the relevant local accident prevention regulations and general safety
■
regulations for the instrument's range of use.
The operating instructions are part of the product and must be kept in the immediate
■
vicinity of the instrument and readily accessible to skilled personnel at any time.
Skilled personnel must have carefully read and understood the operating instructions
■
prior to beginning any work.
The manufacturer's liability is void in the case of any damage caused by using
■
the product contrary to its intended use, non-compliance with these operating
instructions, assignment of insufficiently qualified skilled personnel or unauthorised
modifications to the instrument.
The general terms and conditions contained in the sales documentation shall apply.
■
DH-Budenberg Ltd/WIKA reserve the right to change the contents or form of these
■
operating instructions at any time without prior notice having been given.
Subject to technical modifications.
■
Factory calibrations or UKAS calibrations (pressure calibration with a mass set) are
■
carried out in accordance with international standards.
4
WIKA operating instructions model CPB3800