Personnel Qualification; Personal Protective Equipment - WIKA CPB3800 Betriebsanleitung

2. Safety
Handle mechanical precision measuring instruments with the required care (protect
from humidity, impacts, strong magnetic fields, static electricity and extreme
temperatures, do not insert any objects into the instrument or its openings).
If the instrument is transported from a cold into a warm environment, the formation of
condensation may result in instrument malfunction. Before putting it back into operation,
wait for the instrument temperature and the room temperature to equalise.
The manufacturer shall not be liable for claims of any type based on operation contrary
to the intended use.

2.2 Personnel qualification

WARNING!
Risk of injury should qualification be insufficient!
Improper handling can result in considerable injury and damage to
equipment.
The activities described in these operating instructions may only be
■
carried out by skilled personnel who have the qualifications described
below.
Keep unqualified personnel away from hazardous areas.
■
Skilled personnel
Skilled personnel are understood to be personnel who, based on their technical training,
knowledge of measurement and control technology and on their experience and
knowledge of country-specific regulations, current standards and directives, are capable
of carrying out the work described and independently recognising potential hazards.
Special operating conditions require further appropriate knowledge, e.g. of aggressive
media.
DH-Budenebrg/WIKA can provide dedicated training courses on the correct use of our
products. Please contact your local office for further details.
2.3 Personal protective equipment (P.P.E.)
The personal protective equipment is designed to protect the skilled personnel from
hazards that could impair their safety or health during work. When carrying out the
various tasks on and with the instrument, the skilled personnel must wear personal
protective equipment.
WIKA operating instructions model CPB3800
GB
7