Sennheiser EK 4015 UHF Gebrauchsanleitung Seite 14

Technical Data
RF input, LEMO socket
AF output 1, LEMO socket
AF output 2, 3.5 mm jack
Frequency range
Switchable frequencies
Switching bandwidth
Broadband frequency modulation
Limiter threshold
Noise suppression system
Max. signal-to-noise ratio
at nominal deviation and
RF input voltage > 50 µV
Adjacent channel rejection
Image rejection
Spurious rejection
IF selectivity
Intermodulationratio
referring to 50 dB S/N,
carrier spacing 400/800 kHz
AF output voltage at > 1,3 µV
RF input voltage, referring to
peak deviation at output I
AF deemphasis
AF frequency range
THD at 40 kHz deviation, 1 kHz
and 100 µV RF input voltage
Squelch
Power supply, external voltage socket
Current consumption
Dimensions / Weight
Delivery includes
Subject to alterations.
14
50 Ω, floating
balanced, floating, internal resistance 100 Ω
for microphone level, switchable for line
unbalanced adjustable, max. 50 mW 10 Ω
450 - 960 MHz
32
24 MHz
± 40 kHz nominal deviation /
± 56 kHz peak deviation
< 1,5 µV
HiDynPlus (not disconnectable)
113 dB DIN 45500, A-weighted
98 dB CCIR 468, peak
> 65 dB (± 400 kHz)
> 55 dB
> 70 dB
> 70 dB
63 dB (2 transmitter method)
30 mV/600 Ω or 3.2 V/10 kΩ
switchable
50 µsec.
60 Hz - 20 kHz (-3 dB)
< 1 %
0 - approx. 100 µV, adjustable
3 - 8 V / 11 - 15 V
< 120 mA / 210 mA
147 x 75 x 23 mm / approx. 250 g
1 EK 4015 receiver
1 LEMO/XLR-adapter cable with
adjustable attenuator (0 - -40 dB)
1 connecting cable with right angle plug
and open wires
1 EZP 4015 mounting plate with screws
2 antennas, provided with threads
1 set of cable ties