Fitting, Connecting And Adjusting The Position Transmitter; Fitting The Position Transmitter; Connecting The Position Transmitter - Dürkopp Adler 577-1111 Bedienungsanleitung

6.

Fitting, connecting and adjusting the position transmitter

6.1

Fitting the position transmitter

6.2

Connecting the position transmitter

7
–
Slip the position transmitter 6 onto the shaft.
–
Tighten the screws 7.
–
Set the positions ( see chapter 6.3 ).
8
–
Pass the connecting cable of the position transmitter through the
hole in the table top and introduce the plug into the bush 8 in the
control box.
7
6
2
13