5 Attaching the upholstery and coverings
5.2 Manual model and Manual Plus
18
4. Press down on the seat upholstery from above until the two rear lugs
snap into the seat support.
The internal threads of the lugs are now visible from below
through the holes in the seat support.
5. Screw the seat upholstery onto the seat support from below with 2
screws.
Attaching covers
1. Slide the lower backrest cover underneath the upper one and clip into
the 4 receptacles.
Sirona Dental Systems GmbH
Installation instructions and service notes HUGO
D 3533.031.02.01.02 08.2011
62 03 835 D 3533