List Of Pictograms Used; Introduction; Intended Use; Parts Description - Parkside PDRD 13 A1 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung

List of pictograms used

Read the instruction manual!
Warning of general danger
Explosion hazard!
Direct current / voltage
Wear protective gloves!
Wear a dust mask!
Digital inflator PDRD 13 A1

Introduction

We congratulate you on the pur-
chase of your new product. You
have chosen a high quality product.
The instructions for use are part of the product.
They contain important information concerning
safety, use and disposal. Before using the
product, please familiarise yourself with all of
the safety information and instructions for use.
Only use the product as described and for the
specified applications. If you pass the product
on to anyone else, please ensure that you
also pass on all the documentation with it.

Intended use

The digital pneumatic inflator is designed for
inflating and regulating the air pressure of
bicycle tyres, balls, airbeds, rubber dinghies
etc. Use the product only as described and
only for the specific applications as stated.
6 GB
Never point the product at
people or animals.
Keep childen away from the
product!
Low battery level, replace a
new one
Dispose of the packaging and
product in an environmentally-
friendly manner!
b
a
Wear ear protection!
Wear suitable protective gloves.
The product is only intended for private use
only and is not for commercial use. Any use
that is different from the intended use as sta-
ted above is prohibited and there is potential
danger. Damage or injury caused by misuse
or disregarding the above warning is not co-
vered by the warranty or any liability on the
part of the manufacturer.
Note: The product is not suitable for inflating
car or motorized vehicle tyre.

Parts description

(see fig. A+B)
Digital manometer
1
LCD display panel
2
Light / Zero button
3
On / Unit / Off button
4
Inflator
5
Pressure release button
6
Male air fitting coupler
7
Trigger
8
Flexible hose
9
Connector
10
Lock lever
11