hanseatic HG6085C14T7635EI Gebrauchsanleitung Seite 80

Page EN-36 Troubleshooting table
Problem
The water is not
running or it is running
only very slowly.
The water is not
running off or only very
slowly.
The dishwasher is not
watertight.
The dishwasher can be
switched on/off, but not
cannot be operated.
The dishwasher cannot
be operated.
Possible cause
There is a kink in the inlet
hose.
The water tap is not properly
on.
The filters are blocked.
The outlet hose is kinked,
has been extended or is
hanging too high up/too low.
The door seal is defective.
The outlet hose or the inlet
hose is defective.
The dishwasher can only be
operated when the appliance
door is closed.
The buttons are locked.
Solution
Arrange the inlet hose properly so
that it is not kinked (please see
"Connecting the inlet hose" on
page EN-30).
Turn the water tap on completely.
Clean the filters (see "Checking
and cleaning the filters" on
page EN-26).
Lay out the outlet hose in a proper
manner (see page EN-30).
Have the door seal replaced (see
"Service" on page EN-39).
Have the defective hose replaced
(see "Service" on page EN-39).
Close the dishwasher door.
Unlock the buttons (see "Key lock"
on page EN-25).