Page EN-32
Set-up, connection and initial start-up
Recess dimensions
820 mm
(35)
3. Affix the enclosed condensation-protec-
tive film (35) to the bottom of the work sur-
face. In this way, you will avoid damage to
the worktop caused by hot steam emitted
from the dishwasher when the appliance
door is left open.
4. Place the dishwasher in the desired po-
sition.
90°
Inlet/outlet area
580 mm
and electrical
connection.
600 mm
90°
80 mm
100 mm
5. In order to compensate for uneven floor
surfaces and set up the dishwasher hori-
zontally, you can screw the four adjusta-
ble feet (31) in or out. The adjustable feet
have slots around their circumference.
Insert a screwdriver and turn the adjust-
able foot.
Use a spirit level to set up the dishwasher.
(31)