Mode Button; Auto Power Off Function; Display Illumination - VOLTCRAFT Multi-DMM MT-52 Bedienungsanleitung

MODE Button

The MODE button makes it possible to skip through subfunctions. Each press switches the
function.
• During current measurement (µA, mA, 10A), the device switches from AC (alternate current)
to DC (direct current).
• From resistance measurement, the device switches to diode measurement and acoustic
continuity test.

Auto power OFF function

The DMM turns off automatically after approx. 30 minutes if no button or rotary switch is oper-
ated. This function protects the battery, saves battery power and extends the service life.
To reactivate the DMM after automatic shutdown, use the rotary switch or press any button
(apart from the light button (10)).

Display illumination

The display can be lit if you are working in a badly lit environment. To switch it on or off, press the
" " (10) button in measuring operation. Lighting remains on until it is deactivated manually or
the DMM switches off automatically after approx. 30 minutes.
73