Proper Use; Environmental Conditions; Obligations Of The Operator; Obligations Of Personnel - Fronius TransPocket 4000 CEL Bedienungsanleitung

Proper use

The device is to be used exclusively for its intended purpose.
The device is intended solely for the welding processes specified on the rating
plate.
Any use above and beyond this purpose is deemed improper. The manufacturer
shall not be held liable for any damage arising from such usage.
Proper use includes:
-
-
-
Never use the device for the following purposes:
-
-
-
The device is designed for use in industry and the workshop. The manufacturer
accepts no responsibility for any damage caused through use in a domestic set-
ting.
The manufacturer likewise accepts no liability for inadequate or incorrect results.
Environmental Operation or storage of the device outside the stipulated area will be deemed as
conditions not in accordance with the intended purpose. The manufacturer shall not be held
liable for any damage arising from such usage.
Ambient temperature range:
-
-
Relative humidity:
-
-
The surrounding air must be free from dust, acids, corrosive gases or substances,
etc.
Can be used at altitudes of up to 2000 m (6561 ft. 8.16 in.)
Obligations of The operator must only allow persons to work with the device who:
the operator
-
-
-
Checks must be carried out at regular intervals to ensure that operators are
working in a safety-conscious manner.
Obligations of Before using the device, all persons instructed to do so undertake:
personnel
-
-
62
carefully reading and following all the instructions given in the operating in-
structions
studying and obeying all safety and danger notices carefully
performing all stipulated inspection and maintenance work.
Thawing out pipes
Charging batteries
Starting engines
during operation: -10 °C to + 40 °C (14 °F to 104 °F)
during transport and storage: -20 °C to +55 °C (-4 °F to 131 °F)
up to 50% at 40 °C (104 °F)
up to 90% at 20 °C (68 °F)
are familiar with the fundamental instructions regarding safety at work and
accident prevention and have been instructed in how to use the device
have read and understood these operating instructions, especially the sec-
tion "safety rules", and have confirmed as much with their signatures
are trained to produce the required results.
to observe the basic instructions regarding safety at work and accident pre-
vention
to read these operating instructions, especially the "Safety rules" section and
sign to confirm that they have understood them and will follow them.