Fronius TransPocket 4000 CEL Bedienungsanleitung Seite 95

. 1
TIG Comfort Stop
Welding
1
Raise the welding torch: the arc length is increased significantly
2
Lower the welding torch:
3
- The arc length is decreased significantly
- The TIG Comfort Stop function is triggered
Keep the welding torch at the same height
4
- The welding current is continuously decreased (downslope)
- Arc goes out
Wait for the gas post-flow time to finish and lift the welding torch off the
5
workpiece
I
(1)
TIG welding process with the optional TIG Comfort Stop function activated
(1) Gas pre-flow
(2) Set welding current
(3) DownSlope
(4) Gas post-flow
. 2 . 3
(2)
. 4
t
(3) (4)
95