Safety Rules; General; Proper Use; Environmental Conditions - Fronius USB Update Active Inverter Bedienungsanleitung

Safety rules

General

The device is manufactured using state-of-the-art technology and according to recognised
safety standards. If used incorrectly or misused, however, it can cause:
-
-
-
All persons involved in commissioning, operating, maintaining and servicing the device
must:
-
-
The Operating Instructions must always be at hand wherever the device is being used. In
addition to the Operating Instructions, attention must also be paid to any generally appli-
cable and local regulations regarding accident prevention and environmental protection.
All safety and danger notices on the device:
-
-
-
-
For the location of the safety and danger notices on the device, refer to the section headed
"General information" in the Operating Instructions for the device.
Before switching on the device, rectify any faults that could compromise safety.
This is for your personal safety!

Proper use

The device is to be used exclusively for its intended purpose. Any use above and beyond
this purpose is deemed improper. The manufacturer is not liable for any damage, or unex-
pected or incorrect results arising out of such misuse.
Proper use includes:
-
-
-
Proper handling of the device is essential for it to function correctly. The device must never
be pulled around by the cable.
Environmental Operation or storage of the device outside the stipulated area will be deemed as not in ac-
conditions cordance with the intended purpose. The manufacturer shall not be held liable for any dam-
age arising from such usage.
For exact information on permitted environmental conditions, please refer to the "Technical
data" section.
Injury or death to the operator or a third party
Damage to the device and other material assets belonging to the operator
Inefficient operation of the device
Be suitably qualified
Read and follow these Operating Instructions carefully
Must be in a legible state,
Must not be damaged,
Must not be removed,
Must not be covered, pasted or painted over.
carefully reading and obeying all operating instructions and safety and danger notices,
performing all stipulated inspection and maintenance work,
following all instructions from the battery and vehicle manufacturers.
19